Especificaciones para Chassis Nuevo 42 9 ISO Tanque 20 Pies Chassis Dos Ejes
Chassis Nuevo Fabricado por Cheetah Chassis en USA.
Function | Carries one 20 ft ISO Container. Meets all DOT, TOFC, AAR, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of chassis manufacture and applicable to operation in the United States. |
Overall Chassis Length | 42 ft 9 inches |
Overall Chassis Width | 102 inches |
Tandem Location | |
Kingpin Location | 15 inches |
Maximum Rear Height | 40inches |
Main Beams | Fabricated I-Beam |
Cross Member | Fabricated Channels |
Upper Coupler Assembly | Pick up plate is 5/16” thick and extends approximately 18” behind the kingpin and is reinforced fore and aft by ¼ inch formed channels |
Bolsters | Fabricated channel |
Lift Device | Ready to install |
Twist Lock & Slide Pins | Meets ISO standards and requirements. |
ICC Bumper | 4 inch x 4inch x 3/16 inch Tube step bumper. |
Landing Gear | Jost two speed AAR approved, square leg. 50,000 lb. lift capacity and 140,000 static load capacity. |
Landing Gear Axle Type | Standard |
Landing Gear Foot Group | 10 in. by 10 in. Low profile sandshoe |
Crank Handle Location | Road side handle |
Suspension | Hutch |
Axle Quantity | Two Axles |
Suspension Type | Spring-Ride |
Axle Centers | 49 inch |
Springs | Two Leaf |
Hub Type | Hub piloted for disc wheels |
Hub Material | Steel |
Hub Manufacturer | KIC |
Drum | Outboard mounted |
Rim/Wheels | 8 1/4 X 22.5 hub piloted tubeless |
Wheel/Rim Color | White |
Rim Spacer | None |
Tires | Cheetah Supplied |
Tire Size | 255/70R 22.5 |
Tire Inflation System | None |
Axle Vendor | Meritor |
Axle Type | TN |
Wall Thickness | 1/2 inch |
Axle Track | 77.5 |
Brake Lining Options | Standard |
Lubrication | Oil 90 wt. |
Slack Adjusters | Bendix 5 1/2 inch |
Brake System Vendor | WABCO |
Brake System Type | 2S1M |
Brake Chambers | Haldex |
Hubodometer | None |
Electrical System | 12 volt, 7-way split pin receptacle plug; modular wiring harness |
Light Vendor | TruckLite |
Light Attachment | Grommet mounted |
Light Type | LED |
Metal Preparation | Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning” |
Primer | 70% Zinc Rich Primer |
Topcoat | Urethane Topcoat |
Color | Black |
Markings | FHWA plate, tare weight, 2 small Cheetah logos. |
Customer Decals | Furnished by Customer |
Conspicuity | Meets DOT requirements |
Registration Holder | Plastic with clear screw on top |
Mud Flaps | Cheetah Supplied |
Mud Flap Mounting | 4 mounting bolts |
Fenders | Plastic |
Rear Deck | Expanded metal |
Steel & Fastners | All structural steel is ASTM-A572, Grade 50, or ASTMA607, Grade 50. All structural fasteners are Grade 5 or better and are zinc coated |
GVWR | 65,000 lbs |
Weight | Approximately 7,900 lbs. + 2% |