Especificaciones para Chassis Porta Contenedor 20-40 Pies Ejes Deslizables Tres Ejes 12 Pins

Chassis Nuevo Fabricado por Cheetah Chassis en USA.

Function Carries one 20 ft or one 40 ft containers. Meets all DOT, TOFC, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of manufacture and applicable to operation in the United States.
Length 41ft open
31 ft 2 1/2 inches closed
Width 96″
Rear Axle Location 23 1/2 inches from rear of chassis
Kingpin Height 46 1/2 inches
Kingpin Location 17 1/2 inches
Maximum Rear Height 48″
Landing Gear Location 129 3/8 from center of king pin to center of landing gear leg
Main Beams Fabricated I-Beam with T1-130,000 to 140,000 1/2 x 5 flanges
Bogie Beams Fabricated I-Beam with T1-130,000 to 140,000 1/2 x 5 top flange and 1/2 x 6 bottom flange
Upper Coupler Assembly Pick up plate is 1/4” thick and is reinforced fore and aft by 1/4″ formed channels
Bracing Lateral Bracing in bogie area
Front Bolster 9″ high x 6″ deep channel
Intermediate Bolster Fabricated with retractable twistlocks
Rear Bolster Fabricated with retractable twistlocks
Twist Locks & Slide Pins Meets ISO standards and requirements
Slider Mechanism Lock engagement ensured by two mechanically actuated pins through main beams. Movement is facilitated by steel rollers.
ICC Bumper None, Two (2) rubber bumpers.
Landing Gear Two speed AAR approved, square leg. 50,000 lb lift capacity and 140,000 lb static load capacity.
Landing Gear Axle Type Standard
Landing Gear Foot Group 10″ x 10″ Low profile sandshoe
Crank Handle Location Road side handle
Axle Quantity Three (3) axles
Axle Centers 122″ over 3 axles
Suspension Spring Ride
Springs Three Leaf
Hub Type Stud piloted for disc wheels
Hub Material Steel
Drum Outboard mounted
Rims/Wheel 8.25 X 22.5 hub piloted tubeless
Wheel/Rim Color White
Tires Cheetah Supplied
Tire Size 255/70R22.5 (Low Profile)
Tire Inflation System None
Brake Lining Options Standard
Lubrication Oil 90 wt.
Brake System Type 2S1M
Brake Chambers 30/30
Slack Adjusters Automatic
Hubodometer None
Electrical System 12 volt, 7-way split pin receptacle plug; modular wiring harness
Light Attachment Grommet mounted
Light Type LED
Metal Preparation Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning”
Primer 70% Zinc Rich Primer
Topcoat Urethane
Color Black
Markings FHWA plate, tare weight
Customer Decals Furnished by Customer
Conspicuity Meets DOT requirements
Registration Holder Plastic with clear screw-on top
Mud Flaps Plastic anti sail
Steel & Fasteners All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50 or better unless otherwise specified. All structural fasteners are Grade 5 or better and are zinc coated
GVWR 40 foot position 83,000 lbs.
20 foot position 76,000 lbs.
Weight Approximately 10,250 lbs. ± 3%