Especificaciones para Chassis Porta Contenedor Nuevo 23 5 Pies Ejes Recorredizos

Chassis Nuevo Fabricado por Cheetah Chassis en USA.

Function Carries one 20 ft ISO Container. Meets all DOT, TOFC, AAR, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of chassis manufacture and applicable to operation in the United States.
Overall Chassis Length (extended) 26 ft 11 inches
(closed) 23 ft 3 inches
Overall Chassis Width 96 inches
Tandem Location 49 inches
Kingpin Location 15 inches from front of chassis
Slide Range 44 inches
Maximum Rear Height 52 1/2 inches
Main Beams Wide flange I-Beam 12 inch deep, 19 lb/ft, hot rolled steel, ASTM A572-50
Forward Beams 6 1/2 inch deep I-Beam, fabricated with 1/2 inch x 5- inch grade 65 top flange and 1/2 inch x 6 inch grade 65 bottom flange and 1/4 inch web
Cross Member All cross members are formed from 10-gauge steel
Upper Coupler Assembly Pick up plate is 5/16” thick and extends approximately 33” behind the kingpin and is reinforced fore and aft by 5/16 inch formed channels
Front Bolster Box type with 3/8 inch x 8 inch top plate and ¼ inch
thick, formed channel lower member.
Rear Bolster Box type with 3/8 inch x 8 inch top plate and ¼ inch
thick, formed channel lower member.
Twist Lock & Slide Pins Meets ISO standards and requirements
Slider Mechanism Lock engagement ensured by two spring-loaded pins through main beams.
A weld washer secured polyethylene slide pad facilitates sliding.
Automatic tip activated locking pin.
ICC Bumper 4 inch x 4inch x 3/16 inch Tube step bumper. Main beam
and bumper struts are extended 2 inches to protect rear
bolster. (No rubber dock bumpers)
Landing Gear Jost two speed AAR approved, square leg. 50,000 lb. lift capacity and 140,000 static load capacity.
Landing Gear Axle Type Standard
Landing Gear Foot Group 10 in. by 10 in. Low profile sandshoe
Crank Handle Location Curb side handle
Axle Quantity Two Axles
Suspension Type Spring-Ride
Axle Centers 49 inch
Springs Three Leaf
Hub Type Hub piloted for disc wheels
Hub Material Steel
Drum Outboard mounted
Rim/Wheels 8.25 X 22.5 hub piloted tubeless
Tires Cheetah Supplied
Tire Size 11R 22.5
Tire Inflation System None
Axle Type TN
Wall Thickness 1/2 inch
Axle Track 71.5
Brake Lining Options Standard
Lubrication Oil 90 wt.
Slack Adjusters Automatic
Brake System Type 2S1M
Brake Chambers 30/30
Hubodometer None
Electrical System 12 volt, 7-way split pin receptacle plug; modular wiring harness
Light Attachment Grommet mounted
Light Type Incandescent
Metal Preparation Clean, dry steel and NACE No. 3 /SSPC-SP-6
“Commercial Blast Cleaning”
Primer 70% Zinc Rich Primer
Topcoat Urethane Topcoat
Color Black
Markings FHWA plate, tare weight, 2 small Cheetah logos.
Customer Decals Furnished by Customer
Conspicuity Meets DOT requirements
Registration Holder Plastic with clear screw on top
Mud Flaps Cheetah Supplied
Mud Flap Mounting 4 mounting bolts
Steel & Fastners All structural steel is ASTM-A572, Grade 50, or ASTMA607, Grade 50.
All structural fasteners are Grade 5 or better and are zinc coated.
GVWR 54,000 lbs.
Weight Approximately 6,700 lbs.