Especificaciones para Chassis Nuevo ISO Tanque 43 Pies

Chassis Nuevo Fabricado por Cheetah Chassis en USA.

Function Carries one 20 ft ISO Container. Meets all DOT, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of chassis manufacture and applicable to operation in the United States.
Overall Chassis Length 43 ft. 5 in.
Overall Chassis Width 96 inches
Tandem Location 78 5/8 inches
Kingpin Location 15 inches
Frame Height at Container 41 1/2 inches
Main Beams Fabricated I-Beam Tapered at rear; Grade 100 flanges
Cross Member Fabricated Channels
Upper Coupler Assembly Pick up plate is 1/4” thick and extends approximately 18” behind the kingpin and is reinforced fore and aft by ¼ inch formed channels
Bolsters Fabricated channel
Lift Device Lift ready, but not included
Twist Lock & Slide Pins Meets ISO standards and requirements.
ICC Bumper None
Landing Gear Jost two speed AAR approved, square leg. 50,000 lb. lift capacity and 140,000 static load capacity.
Landing Gear Axle Type Standard
Landing Gear Foot Group 10 in. by 10 in. Low profile sandshoe
Crank Handle Location Road side handle
Axle Quantity Two Axles
Suspension Type Spring-Ride
Axle Centers 109 inch
Springs Two Leaf
Hub Type Hub piloted for disc wheels
Hub Material Steel
Drum Outboard mounted
Rim/Wheels 8 1/4 X 22.5 hub piloted tubeless
Wheel/Rim Color White
Tire Size 255/70R 22.5
Axle Type TN
Wall Thickness 1/2 inch
Axle Track 71.5
Lubrication Oil 90 wt.
Slack Adjusters Automatic
Brake System Type 2S1M
Brake Chambers 30/30
Electrical System 12 volt, 7-way split pin receptacle plug; modular wiring harness
Light Attachment Grommet mounted
Light Type LED
Metal Preparation Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning”
Primer 70% Zinc Rich Primer
Topcoat Urethane Topcoat
Color Black
Markings FHWA plate, tare weight, 2 small Cheetah logos.
Customer Decals Furnished by Customer
Conspicuity Meets DOT requirements
Registration Holder Plastic with clear screw on top
Mud Flaps Cheetah Supplied
Fenders Plastic
Rear Deck 2 x 2 x ¼” mesh
Step Roadside Rear
Steel & Fastners All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50. All structural fasteners are Grade 5 or better and are zinc coated
GVWR 80,000 lbs
Weight Approximately 7,300 lbs.