Especificaciones para Chassis Porta Contenedor Nuevo Extensible 46-55 Pies Cuello Ganzo 4 Ejes

Chassis Nuevo Fabricado por Cheetah Chassis en USA.


Function Carries one 40 ft ISO Container. Meets all DOT, TOFC, AAR, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of chassis manufacture and applicable to operation in the United States.
Overall Chassis Length (extended) 55 feet (closed) 46 feet. Intermediate Stops at 49′ and 53′
Overall Chassis Width 96 inches
Axle Location Rear axle is 25½ inches from rear of chassis.
Kingpin Location 18 inches from front of chassis.
Maximum Rear Height 48 inches.
Main Beams Fabricated I-Beam
Cross Member All crossmembers are formed from 10 gauge steel.
Cross Bracing Lateral
Upper Coupler Assembly Pick up plate is 5/16” thick and extends approximately 18” behind the kingpin and is reinforced fore and aft by 5/16 inch formed channels
Front Bolster ¼ inch wall x 6 inch x 8 inch tube with ½ inch end plates.
Rear Bolster Box type with 3/8 inch x 8 inch top plate and ¼ inch thick, formed
channel lower member with ICC light holes. A small license
plate bracket will be mounted on the under side.
Twist Lock & Slide Pins Meets ISO standards and requirements
Slider Fabricated Beam with two spring loaded pins through
main beams. Movement is facilitated by low friction slide pads.
ICC Bumper 4 inch x 4inch x 3/16 inch Tube step bumper. No Rubber dock bumpers
Landing Gear Jost two speed, AAR approved, square leg. 50,000 lb lift capacity;
140,000 lb static load capacity.
Landing Gear Axle Type Standard
Landing Gear Foot Group Low profile, 10″ x 10″ sandshoe
Crank Handle Location Curb side crank handle.
Axle Quantity Four Axles
Suspension Type Three Spring-Ride, one air ride lift
Axle Centers 60 inch on spring tri-dem
Springs Three Leaf
Hub Type Hub piloted for disc wheels
Hub Material Steel
Drum Outboard mounted
Rim/Wheels 8 1/4 X 22.5 hub piloted tubeless
Wheel/Rim Color White
Tires Cheetah Supplied
Tire Size (14) 255/70R 22.5
Tire Inflation System None
Axle Type TN
Wall Thickness 1/2 inch
Axle Track 71.5
Brake Lining Options Standard
Lubrication Oil 90 wt.
Slack Adjusters Automatic
Brake System Type 2S1M
Brake Chambers 30/30
Hubodometer None
Electrical System 12V, 7-way split pin receptacle plug; modular wiring harness
Light Attachment Grommet mounted
Light Type Incandescent
Metal Preparation Clean, dry steel and NACE 3/SSPC-SP-6 ‘Commercial Blast Cleaning.
Primer 70% Zinc Rich Primer
Topcoat Urethane Topcoat
Color Black
Markings FHWA plate, tare weight, 2 small Cheetah logos.
Customer Decals Furnished by Customer
Conspicuity Meets DOT requirements
Registration Holder Plastic with clear screw on top
Mud Flaps Cheetah Supplied
Mud Flap Mounting 4 mounting bolts
Steel & Fastners All structural steel is ASTM-A572, Grade 50, or ASTMA607, Grade 50.
All structural fasteners are Grade 5 or better and are zinc coated
GVWR 92,000 lbs
Weight Approximately 13,500 lbs. + 2%