Especificaciones para Chassis Porta Contenedor 20-40 Pies Heavy Duty Tres Ejes Deslizables

Chassis Nuevo Fabricado por Cheetah Chassis en USA.

Function Carries one 20 ft (60,000 lbs) or one 40 ft (63,600 lbs) ISO container at capacity. Meets all DOT, TOFC, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of manufacture and applicable to operation in the United States.
Overall Chassis Length Closed: 32 ft 11 in
Extended: 40 ft 6 in
Overall Chassis Width 96 inches
Axle Location 88 5/8 inches
Slide Range 91 3/8 inches total
Kindpin Height 47 inches
Kingpin Location 12 inches from rear face of front bolster
Maximum Rear Height 48 inches
Main Beam Fabricated I-Beam
Bogie Beams Fabricated I-Beam
Cross Member All cross members are formed from 7 ga steel
Upper Coupler Assembly Pick up plate is 5/16″ thick and extends approximately 18″ behind the kingpin and is reinforced fore and aft by 1/4″ formed channels
Bracing Lateral Bracing
Front Bolster 7 ga thick channel 9″ high x 6″ deep with 10 ga stiffeners
Intermediate Bolster 5/16″ wall x 6″ x 8″ tube with 1/2″ end plates and retractable
Rear Bolster Fixed height rectangular box-type beam with drop-in style, low profile twistlocks
Twist Lock & Slide Pins Meets ISO standards and requirements
Slider Mechanism Lock engagement ensured by two spring-loaded pins through main beams. Movement is facilitated by steel rollers.
ICC Bumper 3/16″ x 4″ x 4″ tube step bumper. Two (2) rubber bumpers.
Landing Gear Jost two speed AAR approved, square leg. 50,000 lb lift capacity and 140,000 lb static load capacity.
Landing Gear Axle Type Standard
Landing Gear Foot Group 10 in. by 10 in. Low profile sandshoe
Crank Handle Location Curb side handle
Axle Quantity Three Axles
Suspension Spring-Ride
Axle Centers 60 3/4 inches all axles
Springs Mono Leaf
Hub Type Hub piloted for disc wheels
Hub Material Steel
Drum Outboard mounted
Rim/Wheels 8.25 X 22.5 hub piloted tubeless
Wheel/Rim Color White
Tires Cheetah Supplied
Tire Size 11R 22.5
Tire Inflation System None
Axle Vendor Meritor
Axle Type TN
Wall Thickness 1/2 inch
Axle Track 71 ½
Brake Lining Options Standard
Lubrication Oil 90 wt.
Slack Adjusters Automatic
Brake System Type 2S1M
Brake Chambers 30/30
Hubodometer None
Electrical System 12 volt, 7-way split pin receptacle plug; modular wiring harness
Light Attachment Flange mounted
Light Type LED
Mid-ship Turn Signal Yes
Metal Preparation Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning”
Primer 70% Zinc Rich Primer
Topcoat Urethane
Color Black
Markings FHWA plate, tare weight, 2 small Cheetah logos.
Customer Decals Cheetah Supplied
Conspicuity Meets DOT requirements
Registration Holder Plastic with clear screw on top
Mud Flaps Cheetah Supplied
Mud Flap Mounting 4 mounting bolts
Steel & Fastners All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50 unless otherwise specified. All structural fasteners are Grade 5 or better and are zinc coated
GVWR 71,400 lbs (20 ft)
75,000 lbs (40 ft)
Weight Approximately 11,400 lbs