Especificaciones para Trailer PX 60 Para Transportar Paneles De Concreto
Chassis Nuevo Fabricado por Cheetah Chassis en USA.
Function | Carries Panels two 32 ft x 12 in thick per side, Structurally designed for a maximum of 32,000lbs per side. Meets all DOT, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of manufacture and applicable to operation in the United States. |
Chassis Height | This trailer is designed to carry 12 ft 5 inch tall panels with a total overall height of 13 ft 6 inches. A 13 ft tall panel will have a height of 14 ft 1 inch. |
Overall Chassis Length | 51 ft. 8 in. |
Overall Chassis Width | 102 inches (over tires) |
Tandem Location | 54 3/4 inches |
Kingpin Location | 18 inches |
Ground Clearance | 9″ |
Main Beams | A-Frame, channel, and 4″ x 4″ x 3/16″ tubing |
Upper Coupler Assembly | Pick up plate is 5/16 inch thick and extends approximately 19” behind the kingpin and is reinforced fore and aft by 8 inch formed channels |
Walk Way | None |
Winches | None |
Straps | None |
Rear Deck Platform | Steel diamond plate over suspension area |
Horizontal Support Bars | Front and rear |
Panel Support Feet | Fourteen 10″ x 22″ (inside) |
Bumper | 4 inch x 4inch x 3/16 inch tube step bumper |
Landing Gear | 50,000 lb. Lift capacity and 140,000 static load capacity |
Landing Gear Axle Type | Solid Axle |
Landing Gear Foot Group | 10 in. by 12 in. Low profile sandshoe |
Crank Handle Location | Road side handle |
Rear Prop Leg | None |
Axle Quantity | Two Axles 25K |
Suspension Type | Air-Ride with automatic dump and ride height over ride switch. (5″ of over ride) |
Axle Centers | 54 inch |
Hub Type | Hub piloted for disc wheels |
Hub Material | Steel |
Drum | Outboard mounted |
Rims/Wheel | 8 1/4 X 22.5 hub piloted tubeless |
Wheel/Rim Color | White |
Tires | Cheetah Supplied |
Tire Size | 295/75R 22.5 |
Tire Inflation System | None |
Brake Lining Options | Standard |
Lubrication | Oil 90 wt. |
Brake System Type | 2S1M |
Brake Chambers | 30/30 |
Hubodometer | None |
Electrical System | 12 volt, 7-way split pin receptacle plug; modular wiring harness |
Light Attachment | Flange mounted |
Light Type | LED |
Metal Preparation | Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning” |
Primer | 70% Zinc Rich Primer |
Topcoat | Urethane Topcoat |
Color | Black |
Markings | FHWA plate |
Customer Decals | Furnished by Customer |
Conspicuity | Meets DOT requirements |
Registration Holder | Plastic with clear screw on top |
Mud Flaps | Plastic anti sail |
Steel & Fasteners | All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50. All structural fasteners are Grade 5 or better and are zinc coated |
GVWR | 78,000 lbs |
Weight | Approximately 13,400 lbs |