Especificaciones para Chassis Porta Contenedor 53 Pies Nuevo Cinco Ejes

Chassis Nuevo Fabricado por Cheetah Chassis en USA.

Function Carries one 53 ft or one 40 ft ISO Container. Meets all DOT, TOFC, AAR, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of chassis manufacture and applicable to operation in the United States.
Overall Chassis Length 53 ft. 6 inches
Overall Chassis Width 96 inches (102 over mud flaps)
Axle Locations 43 ft. 6 inches from the 12 inch king pin setting to the center of the quad axle. Lift axle is located 165 inches behind the 12 inch king pin setting.
Kingpin Location 12 inches or 42 inch from rear face of front bolster. Installed in the 12 inch position at factory.
Kingpin Height 48 in.
Maximum Rear Height 48 inches
Main Frame Width 40 in.
Main Beams Fabricated I Beam
Cross Member All cross members are formed from 10-gauge steel
Upper Coupler Assembly Pick up plate is 5/16” thick and extends approximately 18” behind the kingpin and is reinforced fore and aft by 5/16 inch formed channels
Bracing From rear to landing gear
Front Bolster 7 gauge thick channel 9 inch high x 6 inch deep with 10 gauge stiffeners
Intermediate Bolster 1/4 inch wall x 6 inch x 8 inch tube with 1/2 inch end plates. Located for a 40 ft container from the front.
Rear Bolster Box type with 5/16 inch x 8 inch top plate and 7 gauge grade 80 thick formed channel lower member
Twist Lock & Slide Pins Meets ISO standards and requirements.
ICC Bumper 4 inch x 4inch x 3/16 inch Tube step bumper. Main beam and bumper struts are extended 2 inches to protect rear bolster. (No rubber dock bumpers)
Landing Gear Jost two speed AAR approved, square leg. 50,000 lb. lift capacity and 140,000 static load capacity.
Landing Gear Location 123 3/4 inches from the 12 inch Kingpin setting
Landing Gear Axle Type Standard
Landing Gear Foot Group 10 in. by 10 in. Low profile sandshoe
Crank Handle Location Curb side handle
Suspension Type Spring-Ride
Axle Centers 50 1/4 inch
Springs Two Leaf
Hub Type Hub piloted for disc wheels
Hub Material Aluminum
Drum Centrifuse
Rim/Wheels 12.25 x 22.5 Aluminum hub piloted.
Tires Cheetah Supplied
Tire Size 385/65R 22.5
Tire Inflation System None
Axle Type TN
Wall Thickness 1/2 inch
Axle Track 77.5
Brake Lining Options Standard
Lubrication Oil 90 wt.
Slack Adjusters Automatic
Steer Axle One Watson & Chalin steerable air ride with lift system. Two 8.25 x 22.5 Steel hub piloted rims. Two 255/75R 22.5 tires.
Brake System Type 2S1M
Brake Chambers 30/30
Hubodometer None
Electrical System 12 volt, 7-way split pin receptacle plug; modular wiring
Light Attachment Grommet mounted
Light Type LED
Metal Preparation Clean, dry steel and NACE No. 3 /SSPC-SP-6 “ Commercial Blast Cleaning”
Primer 70% Zinc Rich Primer
Topcoat Urethane Topcoat
Color Black
Markings FHWA plate, tare weight, 2 small Cheetah logos.
Customer Decals Furnished by Customer
Conspicuity Meets DOT requirements
Registration Holder Plastic with clear screw on top
Mud Flaps Cheetah Supplied
Mud Flap Mounting 4 mounting bolts
Steel & Fastners All structural steel is ASTM-A572, Grade 50, or ASTMA607, Grade 50. All structural fasteners are Grade 5 or better and are zinc coated
GVWR 90,000 lbs
Weight Approximately 12,150 lbs. + 2%