Especificaciones para Plataformas Nuevas 48 Pies

Chassis Nuevo Fabricado por Cheetah Chassis en USA.
48 Foot Flatbed Trailer

Frame Rating 100,000 lbs. Evenly distributed load over the length of the trailer. 50,000 lbs distributed over 4 feet with the suspension in the forward position. 43,000 lbs distributed over 4 feet with the suspension in the rear position.
Tare Weight Approximately 11,987 lbs.
Overall Chassis Length 48 ft.
Overall Chassis Width 102 inches
Kingpin Location 36 inches
Tractor Fifth Wheel Height 48 inches
Tandem Center Line Sliding, Slide range from 58 inches to 130 inches
Rear Height Approximately 54 inches
Main Beams Fabricated High Tensile Steel
Upper Coupler Assembly Pick up plate is 1/4” thick and is reinforced fore and aft of the kingpin by 1/4 inch formed channels
ICC Bumper 4″ square tube step bumper, D.O.T. approved under ride guard, (1) set two hole rubber dock bumpers
Cross Member 4 inch x 3.19 lbs / ft. structural I Beam on 16 inch centers
Side Rail C6 x 6.5 lbs/ft
Rub Rail 1/4 inch x 2 1/2 inch flat steel with single pipe spool spacers between stake pockets
Stake Pockets 1 5/8 inches deep, 3 1/2 inches wide, 4 inches tall (inside dimensions)
Floor 1 1/8 inch thick Apitong or Angelin Pedra, 2 screws per board.
Landing Gear Two speed AAR approved, square leg. 50,000 lb. lift capacity and 140,000 static load capacity.
Landing Gear Axle Type Standard
Landing Gear Foot Group 10 in. by 10 in. Low profile sandshoe
Crank Handle Location Curb side handle
Axle Quantity Two Axles
Suspension Type Spring-Ride
Axle Centers 49 inch
Springs Three Leaf
Hub Type Hub piloted for disc wheels
Hub Material Steel
Drum Outboard mounted
Rim/Wheels 8 1/4 X 22.5 hub piloted tubeless
Wheel/Rim Color White
Tires Evans supplied
Tire Size 11R 22.5
Tire Inflation System None
Brake Lining Options Standard
Lubrication Oil 90 wt.
Brake System Type 2S1M
Slack Adjusters Automatic
Brake Chambers 30 / 30
Hubodometer None
Electrical System 12 volt, 7-way split pin receptacle plug; modular wiring harness, rear plug for strobe lights
Light Attachemnt Grommet mounted
Light Type LED
Metal Preparation Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning”
Primer 70% Zinc
Topcoat Urethane
Color Black
Markings FHWA plate
Customer Decals Furnished by Customer
Conspicuity Meets DOT requirements
Registration Holder Plastic with clear screw on top
Mud Flaps Plastic anti sail
Winches Track None
Winches Fixed None
Winches Sliding None
Straps None
Chain Sleeves None
D Rings None
Side Kit None
Bulk Head None
Coil Package None
Tire Carrier None
Tool Boxes None
Steel & Fastners All structural steel is ASTM-A572, Grade 50, or ASTMA607, Grade 50. All structural fasteners are Grade 5 or better and are zinc coated
GVWR 65,000 lbs